This driver is for Mac OS X offical release version, you can not use it for Mac OS X public beta version. If you have got any problem or have any suggestion, please write mail to support@draytek.com.tw. DrayTek will keep developing the utility tools for Mac OS X. Please check the release message from http://www.draytek.com.tw regularly. Thanks! A. How To Install Vigor128 Driver for Mac OS X ? Important : if have installed driver before, please follow step 3. to uninstall the old driver first. 1. Run miniVigor.pkg or isdnVigor.pkg or isdnVigorf102.pkg 2. You need restart Mac after installing. Notice : for isdnVigor128, if your firmware version >= V1.03 you need install isdnVigor.pkg. If your isdnVigor128 firmware is V1.02 or older, you need use isdnVigorf102.pkg. You can easily check the firmware version via opening the case of isdnVigor128. There will have a firmware version ticket on EPROM. Or you can just write mail with serial number of isdnVigor128 to support@draytek.com.tw. DrayTek people will check it for you. 3. If need to uninstall the driver. You can find there is a tool for uninstallation in driver package. Just run it to uninstall the old driver. Pasted Graphic.tiff ¨ B. How to connect to internet via Vigor128? 1. Open "Internet Connect" OSX -> Applications -> Internet Connect pastedGraphic.tiff ¨ 2. Select port & modem type Open "Internet Connect" Press "Edit..." select "Configure" as "usbmodem-port" select "Modem" as "DrayTek_ISDN_PPP" or "DrayTek_ISDN_MLPPP" (refer to manual for more detail about modem type) Input "Phone Number", "Name", "Password" in "PPP" folder Select "usbmodem-port" 3. Press "Connect" DrayTek Corp. 2002/10/16 http://www.draytek.com.tw mail : support@draytek.com.tw