************************************************************************* The latest release Notes for Vigor2600G Series Firmware Version : 2.5.9 (3) Release Date : Jan 13, 2006 Applied Models : Vigor2600G Module:3 Vigor2600Gi Module:3 [!! CHECK !!] Check the bottom label of the machine to find module information. This firmware is only for the machine with "Module:3" on the label. If the last digit of Module information is not "3", DO NOT upgrade these firmwares. ************************************************************************** ********* Vigor2600 plus series [Firmware ver. 2.5.9 (3)] ****************** * (1)For Annex A Model, 1> "v26ga_3_259.xxx" is with ADI firmware 42E2EA53. [Standard] 2> "v26gk_3_259.xxx" is with ADI firmware 41E2BE2C. [Recommended for UK, 2.5.9_UK (3)] 3> "v26g0_3_259.xxx" is with ADI firmware 43E2EAA1. [Recommended for high dB users which are using ADSL extended line on UK, 2.5.9_UK2 (3)] 4> "v26gn_3_259.xxx" is with ADI firmware 44E2EA17. [try this one if meet dsl sync issue, new modem code, 2.5.9_N (3)] 5> "v26gc_3_259.xxx" is with ADI firmware 40E2BE29. [Recommended for Netherland, 2.5.9_H (3)] 6> "v26gi_3_259.xxx" is with ADI firmware 43E2EAD4. [Recommended for Italy and Taiwan High Rate ADSL line, 2.5.9_I (3)] 7> "v26gx_3_259.xxx" is with ADI firmware 43E2EA9F. [Recommended for G.Lite only, 2.5.9_X (3)] (2)For Annex B Model, 1> "v26gb_3_259.xxx" is with ADI firmware 40E3BE15. [Standard] 2> "v26gy_3_259.xxx" is with ADI firmware 41E4EA0B. [Recommended for Germany, Portugal, 2.5.9_Y (3)] 3> "v26gz_3_259.xxx" is with ADI firmware 40E4BEA9. [Recommanded for Czech,Greece,Slovakia, 2.5.9_Z (3)] 4> "v26gg_3_259.xxx" is with ADI firmware 40E4BE96. [2.5.9_G (3)] Please ensure you download and use the latest router tools when upgrading the firmware. [Supported Models]: 1. Vigor2600G Module:3, Vigor2600Gi Module:3 [Corrected Problems]: 1.Apply ADSL Led turn on 2.Apply IP Filter to VPN tunnels [Hint] 1. How to find the Wireless Hardware Version: In the "Wireless LAN Setup" > "Wireless Information" > "Firmware Version", the last digit is the Wireless Hardware Version. For example, v1.2.8.16.04.2 means the wireless hardware version is 2. 2. If you have any ADSL on-line problem, please contact your service provide at first, or get into web user interface ("Internet Access Setup" > "PPPoE/PPPoA" or "MPoA") to change the "Modulation" of "DSL Modem Settings" to "T1.413", then to try again. Also, you can use the following Telnet commands to tune your router working with Globespan chipset DSLAM : > adsl status Get DSLAM chipset verdor information > adsl dslam gspn Set ADSL parameters compatible with the Globespan chipset DSLAM > adsl dslam default Set ADSL parameters to fatory default settings [END oF FILE]