****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.8.0 Release Date : February, 28, 2008 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_280.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_280.xxx" is used for modem code 113111. 3> "v2k7v_a2_280.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_280.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) 5> "v2k7v_a4_280.xxx" is used for modem code 1411301. (2)For Annex B Model, 1> "v2k7v_b_280.xxx" is used for modem code 131812. (Standard) 2> "v2k7v_b1_280.xxx" is used for modem code 113112. 3> "v2k7v_b2_280.xxx" is used for modem code 1211202. 4> "v2k7v_b3_280.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7v_b4_280.xxx" is used for modem code 1401302. 6> "v2k7v_b5_280.xxx" is used for modem code 1411402. 7> "v2k7v_b6_280.xxx" is used for modem code 142112. (support T1.413 annexB, Recommanded for Spain) [New Functions] - upgrade wireless driver from 1.0.4 to 1.0.8 - wireless WMM and APSD functions - support the buttons of "bridge" and "repeater" MAC address in Access Point Discovery page - support software IGMP snooping - support wireless software IGMP snooping - support wireless mssid mapping ADSL pvc - support telnet commands "sys britask [on/off]" & "sys brique [lan/wan] [n]" to improve IPTV service. - support telnet command "sys autoreboot [on/off/hour(s)]" - support VPN IKE/IPSec NAT-T function [Improvements & Corrected Problems] - Correct wireless channel mapping - Correct a issue that DHCP renew problem - Correct a issue that PSTN relay problem - Improve that Adjusts security serverity of tear drop attack to send mail alert ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.3.3 Release Date : November, 20, 2007 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2733.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2733.xxx" is used for modem code 113111. 3> "v2k7v_a2_2733.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_2733.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) 5> "v2k7v_a4_2733.xxx" is used for modem code 1411301. (2)For Annex B Model, 1> "v2k7v_b_2733.xxx" is used for modem code 131812. (Standard) 2> "v2k7v_b1_2733.xxx" is used for modem code 113112. 3> "v2k7v_b2_2733.xxx" is used for modem code 1211202. 4> "v2k7v_b3_2733.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7v_b4_2733.xxx" is used for modem code 1401302. 6> "v2k7v_b5_2733.xxx" is used for modem code 1411402. 7> "v2k7v_b6_2733.xxx" is used for modem code 142112. (support T1.413 annexB, Recommanded for Spain) [Improvements & Corrected Problems] - Correct access list logical error problem - Correct Australia ISP (ie. TPG) PPPoE compatibility issue - Correct reboot issue for SIOL VOIP when WAN is in DHCP mode - Increase UPNP sessions up to 30 sessions - Improve "#0" switch to PSTN line function under no dial-tone condition for Vigor 2700V (2S1L) and 2700VG (2S1L) ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.3.2 Release Date : October, 9, 2007 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2732.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2732.xxx" is used for modem code 113111. 3> "v2k7v_a2_2732.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_2732.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) 5> "v2k7v_a4_2732.xxx" is used for modem code 1411301. (2)For Annex B Model, 1> "v2k7v_b_2732.xxx" is used for modem code 131812. (Standard) 2> "v2k7v_b1_2732.xxx" is used for modem code 113112. 3> "v2k7v_b2_2732.xxx" is used for modem code 1211202. 4> "v2k7v_b3_2732.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7v_b4_2732.xxx" is used for modem code 1401302. 6> "v2k7v_b5_2732.xxx" is used for modem code 1411402. 7> "v2k7v_b6_2732.xxx" is used for modem code 142112. (support T1.413 annexB, Recommanded for Spain) [New Functions] - support T1.413 annex B on modem code "142112" - support new annex A modem code "1411301" - support zoneedit to DDNS - support "port" telnet command - support telnet commands to set adsl EC/bitswap parameters (a) adsl bitswap x y (b) adsl fdmec x - user defined types are up to 8 that removes the last 4 predefined types on Bandwidth Management >> Quality of Service, "Service Type" [Improvements & Corrected Problems] - Improve that show ddns update message on syslog - Correct wireless region code issue for Taiwan - Improve that VTA + RVS-Com + ISDN and fax can't work - Improve that Canon L200 ISDN Fax rate 14400 issue - Correct that 2nd subnet(routed) cannot trigger ISDN Backup connection - Correct that windows vista failed to get one IP if it connected with Vigor router at WAN side - Correct that change country code as Taiwan and dial tone has noise - Correct that DHCP can't get ip when strict bind - Improve that Qos Inbound enable will drop the rx throughput - Improve VPN pass through issue when use Nortel VPN client [Notes] - How to use Telent command to set "User Agent" for VoIP voip sip misc -t val = 0, hides SIP header User-Agent val = 1, shows SIP header User-Agent val = 2, use default User-Agent i.e. DrayTek UA-1.2.3 val = 3, use user-defined User-Agent voip sip misc -u UAValue sets User-Agent to uaValue ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.3 Release Date : July, 9, 2007 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_273.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_273.xxx" is used for modem code 113111. 3> "v2k7v_a2_273.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_273.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7v_b_273.xxx" is used for modem code 131812. (Standard) 2> "v2k7v_b1_273.xxx" is used for modem code 113112. 3> "v2k7v_b2_273.xxx" is used for modem code 1211202. 4> "v2k7v_b3_273.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7v_b4_273.xxx" is used for modem code 1401302. [New Functions] - Support four SSIDs for Wireless LAN. - Support ISDN ON-Net/OFF-Net on ISDN models. - Support RFC-3262 for VoIP (MWI (Message Waiting Indicator) and PR-ACK) [Improvements & Corrected Problems] - Correct the issue of DDNS update twice in PPPoE mode. - Improve PPPoE dial speed. - Increase the voice volume of VoIP port. - Improve VoIP stability. - Improve the ISDN VTA stability. - Correct an issue that the 2nd ISDN channel can not be used in ISDN Loop-through if ISDN port is connected with another ISDN phone. - Expand the length of Username and Password from 15 to 63 characters in Mail Alert Setup. - Improve the Telnet command "voip sip misc" to support "User Agent" for VoIP. [Notes] - How to use Telent command to set "User Agent" for VoIP voip sip misc -t val = 0, hides SIP header User-Agent val = 1, shows SIP header User-Agent val = 2, use default User-Agent i.e. DrayTek UA-1.2.3 val = 3, use user-defined User-Agent voip sip misc -u UAValue sets User-Agent to uaValue ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.1.3 Release Date : May, 29, 2007 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2713.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2713.xxx" is used for modem code 113111. 3> "v2k7v_a2_2713.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_2713.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7v_b_2713.xxx" is used for modem code 131812. (Standard) 2> "v2k7v_b1_2713.xxx" is used for modem code 113112. 3> "v2k7v_b2_2713.xxx" is used for modem code 1211202. 4> "v2k7v_b3_2713.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7v_b4_2713.xxx" is used for modem code 1401302. [New Functions ] - Support DHCP with IP Bind MAC. - Add "Near/Far-end Actual Aggregate Transmit Power (ACTATP)" & "Attainable Net Data Rate (ATTNDR)" to Telnet command "adsl status". [Improvements & Corrected Problems] - Improve DDNS log. - Improve the Call Waiting stability. - Correct the wrong wireless MAC address on WUI. - Correct one day delay issue in NTP. - Improve the NTP update in static IP mode. - Correct the DHCP Relay issue when DHCP server is located at WAN side. - Correct the caller ID display issue. - Improve the VOIP codec stability. - Improve the setting for MPoA page. - Improve the VoIP stability when there are two or more ring ports for one SIP account. - Improve the ring detection function of PSTN loop-through. - Improve the stability of PPTP pass-through in ISDN Internet connection. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.1.1 Release Date : January, 9, 2007 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2711.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2711.xxx" is used for modem code 113111. 3> "v2k7v_a2_2711.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_2711.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7v_b_2711.xxx" is used for modem code 131812. (Standard) 2> "v2k7v_b1_2711.xxx" is used for modem code 113112. 3> "v2k7v_b2_2711.xxx" is used for modem code 1211202. 4> "v2k7v_b3_2711.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7v_b4_2711.xxx" is used for modem code 1401302. [Improvements & Corrected Problems] - Improve the router stability when Inbound setting on QoS is chosen and wireless is disabled. - Remove '+' sign if it is in the beginning of caller ID. - Improve the VPN interoperability with VPN Tracker on Mac. - Improve the NTP Client stability. - Correct the display of Annex Type on System Status. - Remove the field of Trap Timeout on Management. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.1 Release Date : Nov, 30, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_270.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_270.xxx" is used for modem code 113111. 3> "v2k7v_a2_270.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_270.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7v_b_270.xxx" is used for modem code 131812. (Standard) 2> "v2k7v_b1_270.xxx" is used for modem code 113112. 3> "v2k7v_b2_270.xxx" is used for modem code 1211202. 4> "v2k7v_b3_270.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7v_b4_270.xxx" is used for modem code 1401302. [Improvements & Corrected Problems] - Improve the DSL interoperability when get OAM cell. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7 Release Date : Dec 23, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_270.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_270.xxx" is used for modem code 113111. 3> "v2k7v_a2_270.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_270.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7v_b_270.xxx" is used for modem code 1211202. (Standard) 2> "v2k7v_b1_270.xxx" is used for modem code 113112. 3> "v2k7v_b2_270.xxx" is used for modem code 131812. 4> "v2k7v_b3_270.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7ge_b4_270.xxx" is used for modem code 1401302. [New Functions] - Add PPPoA/PPPoE Relay function. - Improve DSL port-based bridge service. a. support 1 port to map 1 pvc service. b. support 1 port to map 2 pvc service by "ServiceType" (Normal or IGMP). - Support VLAN-Tag that the packet will be tagged while sending out by DSL and the tag on the incoming packet will be removed. - Support DSL ATM QoS PCR/SCR/MSB. - add "Outbound TCP ACK Prioritize" function for QoS. - add telnet command "internet" & "nmask". [Improvements & Corrected Problems] - Improve PPPoE/LLC perfromance. - Correct the SNMP interface:ifPhysAddr incorrent issue for both LAN and ADSL interfaces. - Correct 'adsl ppp' command issue that modulation (modu) can't be set more than four. - Improve wireless performance and coverage. - Enlarged DHCP client protocol handler buffer size up to 576 bytes. - Correct a issue that VCI not answer ISDN call with 3.1K audio parameter issue. - Roll back to IDLE status when accept PPTP socket fail to prevent from occupying a virtual interface forever. - Correct a rebooting issue when set a wrong SIP account. - Correct a issue that the wrong SIP Account show in digit Map page. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.3.1 Release Date : Sep 25, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2631.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2631.xxx" is used for modem code 113111. 3> "v2k7v_a2_2631.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_2631.xxx" is used for modem code 1401201. (2)For Annex B Model, 1> "v2k7v_b2_2631.xxx" is used for modem code 1211202. 2> "v2k7v_b1_2631.xxx" is used for modem code 113112. 3> "v2k7v_b_2631.xxx" is used for modem code 131812. (Standard) 4> "v2k7v_b3_2631.xxx" is used for modem code 1311302. (Recommanded for Germany) [Improvements & Corrected Problems] - Correct that client can not find AP after configuring WDS. - Correct 'adsl ppp' command issue that modu can't set over 4. - Improve ADSL retrain issue. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.2.1 Release Date : July 31, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2621.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2621.xxx" is used for modem code 113111. 3> "v2k7v_a2_2621.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_2621.xxx" is used for modem code 1401201. (2)For Annex B Model, 1> "v2k7v_b_2621.xxx" is used for modem code 1211202. 2> "v2k7v_b1_2621.xxx" is used for modem code 113112. 3> "v2k7v_b2_2621.xxx" is used for modem code 131812. (Standard) 4> "v2k7v_b3_2621.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - True IP DMZ function. - Add telnet command for Broadsoft SIP proxy call control mode. - Add protection for "Configuration Backup / Restoration" to prevent loading wrong configuration. [Improvements & Corrected Problems] - Improve interoperability for SIP server authentication. - Correct the problem of set default limit value but causing reset current session count. - Correct the problem that ring pattern cannot work properly for SIP account after index three. - Correct the issue that answering port (FXS1 or FXS2) cannot connect to transferring call while receiving it for both ring ports (FXS1 and 2) are activated. - Correct the issue that firewall setting is unable to be restored when use "Configuration Backup / Restoration". - Correct the issue that enabling hot-line function with empty SIP URL. Note: 1. To turn on/off broadsoft call control mode, use the following telnet command: > voip sip acc n -B val // where n means 1~6 SIP account; val means 0/1 representing turn off/on. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.2 Release Date : June 20, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_262.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_262.xxx" is used for modem code 113111. 3> "v2k7v_a2_262.xxx" is used for modem code 131701. (Recommanded for the UK) (2)For Annex B Model, 1> "v2k7v_b_262.xxx" is used for modem code 1211202. 2> "v2k7v_b1_262.xxx" is used for modem code 113112. 3> "v2k7v_b2_262.xxx" is used for modem code 131812. (Standard) 4> "v2k7v_b3_262.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - Support ISDN function on Vigor2700Gi and Vigor2700VGi. - Add Bandwidth Management (limit session and limit bandwidth). - Add Wake on LAN, Ping Diagnosis and Trace Route functions. - Add Data Flow Monitor function. - Release new ADSL/2/2+ modem code 131701 for Annex A and 131812 for Annex B. [Improvements & Corrected Problems] - Add switch settings for syslog message. - Add authentication setting for Mail Alert. - Added two Telnet commands "wan ppp_mru" and "wan ppp_ipcp_vso" to adjust the size of PPP LCP MRU and enable/disable PPP IPCP VSO (Vendor Specific Option). - Correct daylight saving for "Vladivostok" setting. - Correct an issue that DPD doesn't work on dial-in side. - Correct an issue that wireless function can not be re-enabled. - Correct an issue that Open Port function fails when WAN connection drops and reconnects again. - Correct an issue that you can login to the Vigor via 2nd IP even though the "Allow management from the Internet" is disabled. - Correct vpi/vci=0 issue when download RST firmware. - Correct a reboot issue due to DPD log appeared while executing Telnet command "log -wt". - Correct an issue that router cannot get a static WAN IP from Arrakis' (British Telcom) BBRAS via PPPoA protocol even they have choose a fixed IP to the PPPoA session of WAN port. - Improve the Telnet commands "mngt noping" and "mngt defenseworm". - Improve DDNS for ChangeIP DDNS provider. - Improve the note description on VPN Remote Access Control page. - Improve the RFC-2543 interoperability. - Move the 'PSTN Setup' setting into the Dial Plan page on 2S1L model. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.1 Release Date : April 10, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) ****************************************************************************************** [Introduction] The Vigor2700 series are compliance of ADSL (T1.413 issue 2, ITU G.922.1 (G.dmt)), ADSL2 (ITU G.992.3 (G.dmt.bis)) and ADSL2+ (ITU G.992.5). The maximum bandwidth is up to 24Mbps for downstream and 1Mbps for upstream. The compliance of ADSL2/2+ makes Vigor2700 series a great improvement on both loop reach and bandwidth. The Vigor2700 series provides all-in-one function for four-port Ethernet Switch, 802.11-based wireless connectivity (G model) is available for customer's alternative. The all-in-one design makes network management simply and easily. The rich VPN and firewall features protect the against versatile Internet malicious attacks. The Vigor2700 series provides 2 VPN tunnels with AES, MPPE and DES/3DES encryption. The IKE authentication is more flexible for choosing digital signature (X.509) or pre-shared key. The firewall contains SPI, IP/MAC address filtering, IM/P2P blocking, DoS/DDoS protection and Web/URL content filtering. For more details of the product information, please visit our website on http://www.draytek.com/. [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_261.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_261.xxx" is used for modem code 113111. 3> "v2k7v_a2_261.xxx" is used for modem code 131701. (2)For Annex B Model, 1> "v2k7v_b_261.xxx" is used for modem code 1211202. (Standard) 2> "v2k7v_b1_261.xxx" is used for modem code 113112. 3> "v2k7v_b2_261.xxx" is used for modem code 131812. [End Of File]