****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.2.1 Release Date : Auguest, 2, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_2621.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_2621.xxx" is used for modem code 113111. 3> "v2k7ge_a2_2621.xxx" is used for modem code 131701. (Recommanded for the UK) 4> "v2k7ge_a3_2621.xxx" is used for modem code 1401201. (2)For Annex B Model, 1> "v2k7ge_b_2621.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_2621.xxx" is used for modem code 113112. 3> "v2k7ge_b2_2621.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_2621.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - True IP DMZ function. - Add protection for "Configuration Backup / Restoration" to prevent loading wrong configuration. [Improvements & Corrected Problems] - Correct the problem of set default limit value but causing reset current session count. - Correct the issue that firewall setting is unable to be restored when use "Configuration Backup / Restoration". [END oF FILE] ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.2 Release Date : July, 5, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_262.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_262.xxx" is used for modem code 113111. 3> "v2k7ge_a2_262.xxx" is used for modem code 131701. (Recommanded for the UK) (2)For Annex B Model, 1> "v2k7ge_b_262.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_262.xxx" is used for modem code 113112. 3> "v2k7ge_b2_262.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_262.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - Add Bandwidth Management (limit session and limit bandwidth). - Add Wake on LAN, Ping Diagnosis and Trace Route functions. - Add Data Flow Monitor function. - Release new ADSL/2/2+ modem code 131701 for Annex A and 131812 for Annex B. [Improvements & Corrected Problems] - Add switch settings for syslog message. - Add authentication setting for Mail Alert. - Added two Telnet commands "wan ppp_mru" and "wan ppp_ipcp_vso" to adjust the size of PPP LCP MRU and enable/disable PPP IPCP VSO (Vendor Specific Option). - Correct daylight saving for "Vladivostok" setting. - Correct an issue that wireless function can not be re-enabled. - Correct an issue that Open Port function fails when WAN connection drops and reconnects again. - Correct an issue that you can login to the Vigor via 2nd IP even though the "Allow management from the Internet" is disabled. - Correct an issue that router cannot get a static WAN IP from Arrakis' (British Telcom) BBRAS via PPPoA protocol even they have choose a fixed IP to the PPPoA session of WAN port. - Improve the Telnet commands "mngt noping" and "mngt defenseworm". - Improve DDNS for ChangeIP DDNS provider. - Improve NAT performance. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.1 Release Date : December 31, 2005 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_261.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_261.xxx" is used for modem code 113111. (2)For Annex B Model, 1> "v2k7ge_b_261.xxx" is used for modem code 1211202. (Standard) 2> "v2k7ge_b1_261.xxx" is used for modem code 113112. [Improvements & Corrected Problems] - Correct 1483_route fix ip problem. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.0 ( first release for the product new launch) Release Date : December 12, 2005 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Introduction] The Vigor2700Ge/2700e are compliance of ADSL (T1.413 issue 2, ITU G.922.1 (G.dmt)), ADSL2 (ITU G.992.3 (G.dmt.bis)), and ADSL2+ (ITU G.992.5). The maximum bandwidth is up to 24Mbps for downstream and 1Mbps for upstream. The compliance of ADSL2/2+ makes Vigor2700Ge/2700e a great improvement on both loop reach and bandwidth. The Vigor2700Ge/2700e provide all-in-one function for Four ports Ethernet Switch, 802.11-based wireless connectivity (G model) are available for customer's alternative. The all-in-one design makes network management simple and easy. The firewall contains the SPI, IP/MAC address filtering, IM/P2P blocking, DoS/DDoS protection and Web/URL contect filtering. For more details of the product information, please visit our websites on http://www.draytek.com/ [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_260.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_260.xxx" is used for modem code 113111. (2)For Annex B Model, 1> "v2k7ge_b_260.xxx" is used for modem code 1211202. (Standard) 2> "v2k7ge_b1_260.xxx" is used for modem code 113112. [END oF FILE]