****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.3 Release Date : Sep, 22, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_263.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_263.xxx" is used for modem code 113111. 3> "v2k7ge_a2_263.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7ge_a3_263.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7ge_b2_263.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_263.xxx" is used for modem code 113112. 3> "v2k7ge_b_263.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_263.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - Add True IP DMZ function. - Support Annex M (modem code MUST be 121201 or later). - Support G.lite (for modem code 1401201 only). - Add two new adsl Telnet commands. a. "adsl showbins" to show dsl bits per bin(tone) information. b. "adsl optn dual on/off" to enable/disable dual-latency (modem code MUST be 131701 or later). - Add more wireless messages on syslog. - Add DSL Annex Info on WUI. [Improvements & Corrected Problems] - Allow dynamic ip client to dial-in without default dial-in preshared key if certificate is used. - Improve the PPPoE interoperability. - Improve the DDNS stability. - Correct display of "path mode" and "dslam vendor information" on Telnet command "adsl status". - Correct the issue that wireless client can't find AP after configuring WDS. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.2.1 Release Date : Auguest, 2, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_2621.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_2621.xxx" is used for modem code 113111. 3> "v2k7ge_a2_2621.xxx" is used for modem code 131701. (Recommanded for the UK) 4> "v2k7ge_a3_2621.xxx" is used for modem code 1401201. (2)For Annex B Model, 1> "v2k7ge_b_2621.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_2621.xxx" is used for modem code 113112. 3> "v2k7ge_b2_2621.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_2621.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - True IP DMZ function. - Add protection for "Configuration Backup / Restoration" to prevent loading wrong configuration. [Improvements & Corrected Problems] - Correct the problem of set default limit value but causing reset current session count. - Correct the issue that firewall setting is unable to be restored when use "Configuration Backup / Restoration". [END of FILE]