****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.7.3.3 Release Date : November, 20, 2007 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_2733.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_2733.xxx" is used for modem code 113111. 3> "v2k7ge_a2_2733.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7ge_a3_2733.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) 5> "v2k7ge_a4_2733.xxx" is used for modem code 1411301. (2)For Annex B Model, 1> "v2k7ge_b_2733.xxx" is used for modem code 131812. (Standard) 2> "v2k7ge_b1_2733.xxx" is used for modem code 113112. 3> "v2k7ge_b2_2733.xxx" is used for modem code 1211202. 4> "v2k7ge_b3_2733.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7ge_b4_2733.xxx" is used for modem code 1401302. 6> "v2k7ge_b5_2733.xxx" is used for modem code 1411402. 7> "v2k7ge_b6_2733.xxx" is used for modem code 142112. (support T1.413 annexB) [Improvements & Corrected Problems] - Improve compatibility with Windows Vista - Correct computer can't get IP when using Bind IP to MAC - Strict Bind function - Improve VPN pass through with Nortel VPN client - Correct access list logical error problem - Correct Australia ISP (ie. TPG) PPPoE compatibility issue - Increase UPNP sessions up to 30 sessions - Improve DSL tx/rx rate statistic issue [Telnet Command] - support "vlan" telnet command vlan ? vlan on vlan off vlan status vlan group id [set/set_ex] [p1/p2/p3/p4] vlan restart ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.7.3 Release Date : September, 06, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_273.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_273.xxx" is used for modem code 113111. 3> "v2k7ge_a2_273.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7ge_a3_273.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) 5> "v2k7ge_a4_273.xxx" is used for modem code 1411301. (2)For Annex B Model, 1> "v2k7ge_b_273.xxx" is used for modem code 131812. (Standard) 2> "v2k7ge_b1_273.xxx" is used for modem code 113112. 3> "v2k7ge_b2_273.xxx" is used for modem code 1211202. 4> "v2k7ge_b3_273.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7ge_b4_273.xxx" is used for modem code 1401302. 6> "v2k7ge_b5_273.xxx" is used for modem code 1411402. 7> "v2k7ge_b6_273.xxx" is used for modem code 142112. (support T1.413 annexB) [New Functions] - support T1.413 annex B on modem code "142112" - support new annex A modem code "1411301" - support zoneedit to DDNS - support "port" telnet command - support telnet command to set EC/bitswap parameter of dsl (a) adsl bitswap x y (b) adsl fdmec x [Improvements & Corrected Problems] - Improve that show ddns update message on syslog ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.7.1.1 Release Date : January, 10, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_2711.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_2711.xxx" is used for modem code 113111. 3> "v2k7ge_a2_2711.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7ge_a3_2711.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7ge_b_2711.xxx" is used for modem code 131812. (Standard) 2> "v2k7ge_b1_2711.xxx" is used for modem code 113112. 3> "v2k7ge_b2_2711.xxx" is used for modem code 1211202. 4> "v2k7ge_b3_2711.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7ge_b4_2711.xxx" is used for modem code 1401302. [Improvements & Corrected Problems] - Improve the NTP Client stability. - Correct the display of Annex Type on System Status. - Remove the field of Trap Timeout on Management. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.7.1 Release Date : Nov, 28, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_271.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_271.xxx" is used for modem code 113111. 3> "v2k7ge_a2_271.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7ge_a3_271.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7ge_b_271.xxx" is used for modem code 131812. (Standard) 2> "v2k7ge_b1_271.xxx" is used for modem code 113112. 3> "v2k7ge_b2_271.xxx" is used for modem code 1211202. 4> "v2k7ge_b3_271.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7ge_b4_271.xxx" is used for modem code 1401302. [Improvements & Corrected Problems] - Improve the DSL interoperability when get OAM cell. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.7 Release Date : Nov, 21, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_270.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_270.xxx" is used for modem code 113111. 3> "v2k7ge_a2_270.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7ge_a3_270.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7ge_b2_270.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_270.xxx" is used for modem code 113112. 3> "v2k7ge_b_270.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_270.xxx" is used for modem code 1311302. (Recommanded for Germany) 5> "v2k7ge_b4_270.xxx" is used for modem code 1401302. [New Functions] - Add PPPoA/PPPoE Relay function. - Improve DSL port-based bridge service. a. support 1 port to map 1 pvc service. b. support 1 port to map 2 pvc service by "ServiceType" (Normal or IGMP). - Support VLAN-Tag that the packet will be tagged while sending out by DSL and the tag on the incoming packet will be removed. - Support DSL ATM QoS PCR/SCR/MSB. [Improvements & Corrected Problems] - Improve PPPoE/LLC perfromance. - Correct the SNMP interface:ifPhysAddr incorrent issue for both LAN and ADSL interfaces. - Correct 'adsl ppp' command issue that modulation (modu) can't be set more than four. - Improve wireless performance and coverage. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.3 Release Date : Sep, 22, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_263.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_263.xxx" is used for modem code 113111. 3> "v2k7ge_a2_263.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7ge_a3_263.xxx" is used for modem code 1401201. (Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7ge_b_263.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_263.xxx" is used for modem code 113112. 3> "v2k7ge_b2_263.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_263.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - Add True IP DMZ function. - Support Annex M (modem code MUST be 121201 or later). - Support G.lite (for modem code 1401201 only). - Add two new adsl Telnet commands. a. "adsl showbins" to show dsl bits per bin(tone) information. b. "adsl optn dual on/off" to enable/disable dual-latency (modem code MUST be 131701 or later). - Add more wireless messages on syslog. - Add DSL Annex Info on WUI. [Improvements & Corrected Problems] - Allow dynamic ip client to dial-in without default dial-in preshared key if certificate is used. - Improve the PPPoE interoperability. - Improve the DDNS stability. - Correct display of "path mode" and "dslam vendor information" on Telnet command "adsl status". - Correct the issue that wireless client can't find AP after configuring WDS. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.2.1 Release Date : Auguest, 2, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_2621.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_2621.xxx" is used for modem code 113111. 3> "v2k7ge_a2_2621.xxx" is used for modem code 131701. (Recommanded for the UK) 4> "v2k7ge_a3_2621.xxx" is used for modem code 1401201. (2)For Annex B Model, 1> "v2k7ge_b_2621.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_2621.xxx" is used for modem code 113112. 3> "v2k7ge_b2_2621.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_2621.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - True IP DMZ function. - Add protection for "Configuration Backup / Restoration" to prevent loading wrong configuration. [Improvements & Corrected Problems] - Correct the problem of set default limit value but causing reset current session count. - Correct the issue that firewall setting is unable to be restored when use "Configuration Backup / Restoration". ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.2 Release Date : July, 5, 2006 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_262.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_262.xxx" is used for modem code 113111. 3> "v2k7ge_a2_262.xxx" is used for modem code 131701. (Recommanded for the UK) (2)For Annex B Model, 1> "v2k7ge_b_262.xxx" is used for modem code 1211202. 2> "v2k7ge_b1_262.xxx" is used for modem code 113112. 3> "v2k7ge_b2_262.xxx" is used for modem code 131812. (Standard) 4> "v2k7ge_b3_262.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - Add Bandwidth Management (limit session and limit bandwidth). - Add Wake on LAN, Ping Diagnosis and Trace Route functions. - Add Data Flow Monitor function. - Release new ADSL/2/2+ modem code 131701 for Annex A and 131812 for Annex B. [Improvements & Corrected Problems] - Add switch settings for syslog message. - Add authentication setting for Mail Alert. - Added two Telnet commands "wan ppp_mru" and "wan ppp_ipcp_vso" to adjust the size of PPP LCP MRU and enable/disable PPP IPCP VSO (Vendor Specific Option). - Correct daylight saving for "Vladivostok" setting. - Correct an issue that wireless function can not be re-enabled. - Correct an issue that Open Port function fails when WAN connection drops and reconnects again. - Correct an issue that you can login to the Vigor via 2nd IP even though the "Allow management from the Internet" is disabled. - Correct an issue that router cannot get a static WAN IP from Arrakis' (British Telcom) BBRAS via PPPoA protocol even they have choose a fixed IP to the PPPoA session of WAN port. - Improve the Telnet commands "mngt noping" and "mngt defenseworm". - Improve DDNS for ChangeIP DDNS provider. - Improve NAT performance. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.1 Release Date : December 31, 2005 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_261.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_261.xxx" is used for modem code 113111. (2)For Annex B Model, 1> "v2k7ge_b_261.xxx" is used for modem code 1211202. (Standard) 2> "v2k7ge_b1_261.xxx" is used for modem code 113112. [Improvements & Corrected Problems] - Correct 1483_route fix ip problem. ****************************************************************************************** Release Notes for Vigor2700Ge/Vigor2700e Firmware Version : 2.6.0 ( first release for the product new launch) Release Date : December 12, 2005 Applied Models : Vigor2700Ge, Vigor2700e ****************************************************************************************** [Introduction] The Vigor2700Ge/2700e are compliance of ADSL (T1.413 issue 2, ITU G.922.1 (G.dmt)), ADSL2 (ITU G.992.3 (G.dmt.bis)), and ADSL2+ (ITU G.992.5). The maximum bandwidth is up to 24Mbps for downstream and 1Mbps for upstream. The compliance of ADSL2/2+ makes Vigor2700Ge/2700e a great improvement on both loop reach and bandwidth. The Vigor2700Ge/2700e provide all-in-one function for Four ports Ethernet Switch, 802.11-based wireless connectivity (G model) are available for customer's alternative. The all-in-one design makes network management simple and easy. The firewall contains the SPI, IP/MAC address filtering, IM/P2P blocking, DoS/DDoS protection and Web/URL contect filtering. For more details of the product information, please visit our websites on http://www.draytek.com/ [Release Firmware] (1)For Annex A Model, 1> "v2k7ge_a_260.xxx" is used for modem code 121201. (Standard) 2> "v2k7ge_a1_260.xxx" is used for modem code 113111. (2)For Annex B Model, 1> "v2k7ge_b_260.xxx" is used for modem code 1211202. (Standard) 2> "v2k7ge_b1_260.xxx" is used for modem code 113112. [END oF FILE]